Watchpat One-how To Use.com

itamar WatchPAT Ane Disposable Home Sleep Apnea Test

This guide will take y'all step past step and testify you how to correctly use the WatchPAT® ONE Home Slumber Apnea Test.

Before applying WatchPAT® ONE:

It is recommended to apply the WatchPAT® ONE device to your non-dominant hand.
Probe can exist worn on whatsoever finger, except the thumb.
Before utilize, remove tight clothes, rings, watches and other jewelry.
Remove nail polish and artificial nails from the test finger and brand sure the fingernail is cut short.
Annotation: Use only Alkaline AAA battery. Do non insert the battery until y'all are ready to go to bed.

Installation

Before you proceed with your slumber study make sure you have internet access, your phone, WatchPAT® ONE device, and PIN number.
Download the WatchPAT® ONE awarding to your mobile device (available on Apple App Store and Google Play Store).
Open the WatchPAT® ONE application and allow all permissions required past the application. These permissions are necessary for the application to operate. Take out the WatchPAT® ONE from the box. You can click the "Preview" button on the application to have a quick bout, showing how to set up the device. Printing "Ready" button when done.
Insert the battery into the WatchPAT® ONE device.
Press "Next" when done.
Remove your picket and jewelry from your test mitt. Press "Next" when washed.
Enter the iv-digit PIN code provided by your physician's office or provider, and press "Enter".
Put the WatchPAT® ONE device on your non-dominant hand. Ensure it is non likewise tight and not also loose. Printing "Adjacent" when washed.
Take the breast sensor (snoring and torso position sensor) and direct the cablevision in through your sleeve and out through the cervix opening. Remove the tab from the sticker and attach the sensor just below your sternal notch. Press "Next" when done. * If your WatchPAT® ONE device does not include the chest sensor, skip this step.
Identify the probe all the fashion onto a finger of your non-dominant paw. Yous may use any finger except the pollex. The probe should be inserted so the sticker marked TOP is positioned above the fingernail. Hold the probe against a hard surface and slowly pull the Acme tab towards you lot to remove it from the probe. Printing "Next" when done.
You are all ready.
Last few steps before you begin your sleep written report:
1. Make sure your phone is located no more than fifteen feet/5 meters from the WatchPAT® ONE device.
2. Plow off all other transmitting devices in the room, such equally other smart phones, smart watches and headphones, as they could interfere with the exam.
3. Connect your phone to the charger, it must remain plugged in throughout the dark. If yous need to get up during the nighttime leave the telephone plugged in, no need to carry it with you. At present click the "Start" push to begin your sleep written report.
In the morning when you wake upwardly, press the "Finish Recording" push, and look a few minutes for the device to complete the data transmission. Later completing the data manual you will receive a thank you message. Once received printing "Shut Application".
Remove the chest sensor, probe and WatchPAT® 1 device. There is no need to keep the device or return it. You tin can simply dispose of it.

Technical Information Labeling

Important Notes:

Storage and functioning temperatures 0oC – 40oC
Practise not endeavour to connect or disconnect any role of the unit of measurement.
Do not try to introduce whatever strange object into the unit.
Do not, under any circumstances, effort to fix a problem by yourself.
The WatchPAT® ONE should not cause any discomfort or pain. Should you encounter unbearable discomfort, remove the device and phone call the help desk.

If y'all accept any questions you may contact
Itamar® Medical Assist Desk at:
one-888-748-2627